目前我用VS2005定制intel 8255QM的網卡驅動,但是WINCE啟動后看不到添加的網絡連接
現在我做了以下幾件事
第一我在platform.bib的MODULES中添加了  
e100ce6.dll $(_FLATRELEASEDIR)\e100ce6.dll NK SHK
第二我在platform.reg中添加了

IF CEPB_INTELFE_PCI

;Create registry information for Intel(R) Miniport Driver

[HKEY_LOCAL_MACHINE\Comm\E100CE6]
  "DisplayName"="Intel(R) Fast Ethernet Controller"
  "Group"="NDIS"
  "ImagePath"="e100ce6.dll"


;Create registry information for template (will be copied to ALL instances of
;adapters using the Intel Miniport Driver)

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCI\Template\E100CE6]
;PCI Bus Enumeration Information
  "Class"=dword:02
  "SubClass"=dword:00
  "ProgIF"=dword:0
  "VendorID"=multi_sz:"8086","8086","8086","8086","8086","8086","8086","8086","8086","8086","8086","8086","8086"
  "DeviceID"=multi_sz:"1229","2449","1031","1032","1033","1034","1035","1036","1037","1038","1039","103A","103B"
  "Dll"="NDIS.dll"
  "Entry"="NdisPCIBusDeviceInit"
  "Transceiver"=dword:3
  "MiniPort"="E100CE6"
;Installable ISR Handler Information
  "IsrDll"="giisr.dll"
  "IsrHandler"="ISRHandler"
  "PortIsIO"=dword:0
  "PortOffset"=dword:0
  "PortSize"=dword:2
  "PortMask"=dword:FF00

;Settings for DHCP IP Configuration, if enabled
IF DHCP
[HKEY_LOCAL_MACHINE\COMM\PCI\E100CE61\Parms\TcpIp]
  "EnableDHCP"=dword:1
  ; This should be MULTI_SZ
  "DefaultGateway"=""
  ; Use zero for broadcast address? (or 255.255.255.255)
  "UseZeroBroadcast"=dword:0
  ; This should be MULTI_SZ, the IP address list
  "IpAddress"="0.0.0.0"
  ; This should be MULTI_SZ, the subnet masks for the above IP addresses
  "Subnetmask"="0.0.0.0"
ENDIF ;//DHCP

;Settings for static IP configuration, if enabled
IF STATIC_IP
[HKEY_LOCAL_MACHINE\COMM\PCI\E100CE61\Parms\TcpIp]
  "EnableDHCP"=dword:0
  ; This should be MULTI_SZ
  "DefaultGateway"="1.2.3.0"
  ; Use zero for broadcast address? (or 255.255.255.255)
  "UseZeroBroadcast"=dword:0
  ; This should be MULTI_SZ, the IP address list
  "IpAddress"="1.2.3.4"
  ; This should be MULTI_SZ, the subnet masks for the above IP addresses
  "Subnetmask"="255.0.0.0"
ENDIF ;//Static IP

[HKEY_LOCAL_MACHINE\Comm\E100CE6B]
  "DisplayName"="Intel(R) Fast Ethernet Controller"
  "Group"="NDIS"
  "ImagePath"="e100ce6.dll"


;Create registry information for template (will be copied to ALL instances of
;adapters using the Intel Miniport Driver)

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCI\Template\E100CE6B]
;PCI Bus Enumeration Information
  "Class"=dword:02
  "SubClass"=dword:00
  "ProgIF"=dword:0
  "VendorID"=multi_sz:"8086","8086","8086","8086","8086","8086","8086","8086","8086","8086","8086"
  "DeviceID"=multi_sz:"103C","103D","103E","1050","1051","1052","1053","1054","1055","1056","1057"
  "Dll"="NDIS.dll"
  "Entry"="NdisPCIBusDeviceInit"
  "Transceiver"=dword:3
;Installable ISR Handler Information
  "IsrDll"="giisr.dll"
  "IsrHandler"="ISRHandler"
  "PortIsIO"=dword:0
  "PortOffset"=dword:0
  "PortSize"=dword:2
  "PortMask"=dword:FF00

;Settings for DHCP IP Configuration, if enabled
IF DHCP
[HKEY_LOCAL_MACHINE\COMM\PCI\E100CE6B1\Parms\TcpIp]
  "EnableDHCP"=dword:1
  ; This should be MULTI_SZ
  "DefaultGateway"=""
  ; Use zero for broadcast address? (or 255.255.255.255)
  "UseZeroBroadcast"=dword:0
  ; This should be MULTI_SZ, the IP address list
  "IpAddress"="0.0.0.0"
  ; This should be MULTI_SZ, the subnet masks for the above IP addresses
  "Subnetmask"="0.0.0.0"
ENDIF ;//DHCP

;Settings for static IP configuration, if enabled
IF STATIC_IP
[HKEY_LOCAL_MACHINE\COMM\PCI\E100CE6B1\Parms\TcpIp]
  "EnableDHCP"=dword:0
  ; This should be MULTI_SZ
  "DefaultGateway"="1.2.3.0"
  ; Use zero for broadcast address? (or 255.255.255.255)
  "UseZeroBroadcast"=dword:0
  ; This should be MULTI_SZ, the IP address list
  "IpAddress"="1.2.3.4"
  ; This should be MULTI_SZ, the subnet masks for the above IP addresses
  "Subnetmask"="255.0.0.0"
ENDIF ;//Static IP

[HKEY_LOCAL_MACHINE\Comm\E100CE6C]
  "DisplayName"="Intel(R) Fast Ethernet Controller"
  "Group"="NDIS"
  "ImagePath"="e100ce6.dll"

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCI\Template\E100CE6C]
;PCI Bus Enumeration Information
  "Class"=dword:02
  "SubClass"=dword:00
  "ProgIF"=dword:0
  "VendorID"=multi_sz:"8086","8086","8086","8086","8086","8086","8086","8086"
  "DeviceID"=multi_sz:"1064","1065","1066","1067","1068","1069","106A","106B"
  "Dll"="NDIS.dll"
  "Entry"="NdisPCIBusDeviceInit"
  "Transceiver"=dword:3
;Installable ISR Handler Information
  "IsrDll"="giisr.dll"
  "IsrHandler"="ISRHandler"
  "PortIsIO"=dword:0
  "PortOffset"=dword:0
  "PortSize"=dword:2
  "PortMask"=dword:FF00

;Settings for DHCP IP Configuration, if enabled
IF DHCP
[HKEY_LOCAL_MACHINE\COMM\PCI\E100CE6C1\Parms\TcpIp]
  "EnableDHCP"=dword:1
  ; This should be MULTI_SZ
  "DefaultGateway"=""
  ; Use zero for broadcast address? (or 255.255.255.255)
  "UseZeroBroadcast"=dword:0
  ; This should be MULTI_SZ, the IP address list
  "IpAddress"="0.0.0.0"
  ; This should be MULTI_SZ, the subnet masks for the above IP addresses
  "Subnetmask"="0.0.0.0"
ENDIF ;//DHCP

;Settings for static IP configuration, if enabled
IF STATIC_IP
[HKEY_LOCAL_MACHINE\COMM\PCI\E100CE6C1\Parms\TcpIp]
  "EnableDHCP"=dword:0
  ; This should be MULTI_SZ
  "DefaultGateway"="1.2.3.0"
  ; Use zero for broadcast address? (or 255.255.255.255)
  "UseZeroBroadcast"=dword:0
  ; This should be MULTI_SZ, the IP address list
  "IpAddress"="1.2.3.4"
  ; This should be MULTI_SZ, the subnet masks for the above IP addresses
  "Subnetmask"="255.0.0.0"
ENDIF ;//Static IP

ENDIF ;//Intel(R) miniport registry additions.
第三我在項目的環境變量中添加了CEPB_INTELFE_PCI =1
第四我把下載的幾個文件復制到了platform\cepc\files的目錄下
第五 以前在5.0會有一個cec文件,但是6.0沒有只有pbcxml,我用vs2005打開cec就報錯,怎么改都不對,所以我也就沒有轉換,添加這個catalog.
但現在問題是在NK.BIN中可以看到網卡的DLL和注冊表的信息，但是OS啟動后看不到這個網卡的連接，希望大家能幫我解決這個問題，謝謝啊